Xray T4 - SHORT FRONT SUSPENSION ARMS ALTERNATIVE; FRONT ARMS - SHORT; SHORT REAR SUSPENSION ARMS ALTERNATIVE; REAR ARMS - SHORT

40
901310
SB M3x10
901408
SB M4x8
903306
SFH M3x6
901310
SB M3x10
901408
SB M4x8
903306
SFH M3x6
306219
SHIM 3x6x1
306219
SHIM 3x6x1
It is possible to mount the short front suspension. You need to use the old
suspension holders and mounted on the marked positions.
The front short arms can be used on a small technical track with high traction.
It is possible to mount the short rear suspension arms from previous T4
versions. You need to use the old RR suspension holder and move the RF block
to the outside holes on the chassis.
The rear short arms can be used on a small technical track with high traction.
SHORT FRONT SUSPENSION ARMS ALTERNATIVE
362649
302710-O
302720-O
302171-H
302171-G
4x8mm
3x10mm
1mm
1mm
303720-O
303168
303169
1mm
1mm
FROM KIT
SHORT REAR SUSPENSION ARMS ALTERNATIVE
FRONT ARMS - SHORT
#302171-H HARD OPTION
#302171-G GRAPHITE OPTION
REAR ARMS - SHORT
#303168 HARD OPTION
#303169 GRAPHITE OPTION
#303721
BRASS REAR 1-PIECE SUSPENSION HOLDER - REAR - RR
OPTION
#302712-O ALU FRONT 1-PIECE SUSPENSION HOLDER (FF-LOW)
#302722-O ALU FRONT 1-PIECE SUSPENSION HOLDER (FR-LOW)
#302711 BRASS FRONT 1-PIECE SUSPENSION HOLDER - FRONT - FF
#302721 BRASS FRONT 1-PIECE SUSPENSION HOLDER - REAR - FR
#303710-O
ALU LOWER 2-PIECE SUSPENSION
HOLDER