43
903306
SFH M3x6
303121-K
SHIM 3x6x0-5
903308
SFH M3x8
For further chassis flex adjustment the optional chassis brace can be
mounted to the chassis.
The brace can be used with both graphite and aluminum chassis.
THERE ARE TWO BRACE ALTERNATIVES:
BRASS - which works also as an extra 15g weight which is recommended
for high to very-high traction conditions.
ALUMINUM - recommended for low-medium-high traction conditions.
THE BRACE ALLOWS GREAT CHASSIS FLEX ADJUSTMENT POSSIBILITIES DEPENDING ON WHICH SCREWS ARE CONNECTED
NOTE ORIENTATION
DETAIL
SHIMSSHIMS
CHANNEL
303763
303762
903308
903306
903306
OPTION
CHASSIS BRACE
Install only the first two screws as shown. Improves on-power stability.
Install all screws along center line plus inner side holes. Generates more off-power
steering and rotation.
IMPORTANT!
When installing screws on the sides, add shims between the brace and the chassis.
Install all screws along chassis center line. Generates more stability and traction.
Install brace with all 7 screws. Recommended for high-traction conditions, gives a lot of
off-power steering and rotation.
IMPORTANT!
When installing screws on the sides, add shims between the brace and the chassis.
SOFT
STIFF
MEDIUM
EXTRA STIFF
303121-K
To Next Page
Loading...
