8
1. GEAR DIFFERENTIAL
1. GEAR DIFFERENTIAL
971240
O 24x0.7
941015
BB 10x15x4
903258
SFH M2.5x8
➊
➋
➌
➍
After disassembling the gear diff, the large O-ring may have an
increased size and may be more difficult to re-install. We recommend
either inserting the old O-ring carefully in the diff cover, or installing
a new O-ring if the old one cannot be made to fit properly.
OIL
Tighten the screws equally but do
NOT tighten them completely.
Finish tightening in this order.
DETAIL
NOTE
ORIENTATION
BEARING OIL
(HUDY #106230)
BEARING OIL
(HUDY #106230)
OIL
To Next Page
Loading...
