Xray XT8 - 8. Center Diff & Motor

42
903414
SFH M4x14
908314
SCH M3x14
961032
S 3.2
XT8E
NOTE DIFF ORIENTATION
SADDLE PACK LAYOUT
908312
SCH M3x12
Pinion
355712 ~ 17 (NOT INCLUDED)
XRAY PINION GEAR
#355712 12T OPTION
#355713 13T OPTION
#355714 14T OPTION
#355715 15T OPTION
#355716 16T OPTION
#355717 17T OPTION
DETAIL
M4
M4
M3
M3
Use M3 or M4 screws which fit your motor.
(M4 INITIAL SETTING)
908412
SCH M4x12
BRICK LAYOUT
NOTE DIFF ORIENTATION
Orientation for the
BRICK ALTERNATIVE
Orientation for the
SADDLE PACK ALTERNATIVE
(INITIAL SETTING)
Orientation for the
SADDLE PACK ALTERNATIVE
Orientation for the
BRICK ALTERNATIVE
(INITIAL SETTING)
Adjust gear mesh so there is minimal play between the gears.
TOO TIGHT gear mesh will put excessive strain on all parts and damage the parts.
TOO LOOSE gear mesh may result in stripped gears.
8. CENTER DIFF & MOTOR