44
XT8
Threadlock on all screws.
Threadlock on all screws.
7x10x0.2 / 0.3 / 0.5
Use appropriate shims to achieve proper
clutchbell endplay.
All screws
Use the cone included with your engine,
or use OPTION XRAY cone #358540.
NOTE ORIENTATION
IMPORTANT!
When installing the engine, first check that the drive shaft does not
touch the engine. If it does, remove some material from the engine
mount as shown to make some room between engine and shaft.
908312
SCH M3x12
964073
S 7x10x0.2
964074
S 7x10x0.3
964075
S 7x10x0.5
9. FUEL TANK & ENGINE
902305
SH M3x5
961032
S 3.2
#650105 FX K303 - 3 PORTS
#650304 FX K502 - 5 PORTS
- DLC
- CERAMIC BEARING
- BALANCED
EUROPEAN
CHAMPION
#351160
GRAPHITE CHASSIS SIDE
GUARD L+R
To Next Page
Loading...
