Connection for KATANA 50 & higher, Fender LT
Loop & LineOut Mode Setting (KATANA 50 and Fender LT Only)
When using ULooper's Line Out port with KATANA 50 and higher or Fender LT, you can connect either
to the amp's AUX input or to external speakers/PA systems. If connected to the amp's AUX, Loop Mode
functions as usual, as shown in the image above. However, to connect to external speakers or a PA
system and have both the KATANA 50 and external speaker produce sound simultaneously, you will
need to switch to Line Out Mode.
To Next Page
Loading...
