Xterra ERG400 - Step 2: Rear Stabilizer Attachment

8
ERG400 Rower
Handlebar, Seat, Pedals & Console
2
Hardware Step 2
Parts Pre-Assembled
on Machine.
1. Pull up the Main frame (1) as shown in gure 2 and install the Rear
Stabilizer (3) on the end of the Aluminum Track (2). Use Combination M5
Allen Wrench & Phillips Head Screw Driver (97) to tighten with four But-
ton Head Socket Bolts (92) and four Flat Washers (69).
68 5
_
aases (69)
68 5
_
aases (69)