Xterra iPOWER+ - Page 41

41
ASSEMBLY STEP 1
3. Remove the unit from the box and put it on a flat and level floor.
4. Pull up Uprights (L & R) to the end with the 2pcs of 3/8" × 2-3/4"Button Head Socket Bolts
(98), 2pcs of Ø3/8" × Ø19 × 1.5TFlat Washers (81)and 2pcs of Ø10 × 2.0TSplit Washers
(73)by using M6L Allen Wrench (124).
ASSEMBLY STEP 2