Need help?Do you have a question about the Xtool IP508S and is the answer not in the manual?
General| Operating System | Android |
|---|---|
| Processor | Quad-Core |
| Connectivity | Wi-Fi |
| Diagnostic Protocols | OBD2 |
| Storage | 16G |
| Weight | 500g |
| Languages Supported | Multiple languages |
Procedure for connecting the scan tool to the vehicle's OBD-II port for communication.
Steps to initiate the vehicle diagnosis process after connection.
Methods to select a vehicle for diagnosis: AUTO SCAN, MANUAL INPUT, or AREA.
Details the diagnostic capabilities like reading ECU info, DTCs, live data, and freeze frame.
Procedure to bleed the ABS system to restore brake sensitivity and performance.
Resets the engine oil life system based on driving conditions and climate.
Resets the electronic parking brake system, including brake pads and sensors.
Calibrates the Steering Angle Sensor, essential after steering system repairs.
Sets initial throttle actuator settings and returns learned values to default.
Evaluates battery charge state and registers battery replacement.
Writes injector identification codes into the ECU for accurate fuel injection.
Clears PM from DPF filter via continuous combustion oxidation mode.
To Next Page
