Xtralis VESDA - Scope; Document Conventions

VESDA Commissioning Guide VESDA by Xtralis
ii
Scope
The VESDA Commissioning Guide outlines the commissioning process for the VESDA system. It will guide
you through the commission process and the completion of commissioning documentation. The guide also
provides information on the approval and handover of commissioned VESDA systems.
The Commissioning Guide helps with the commissioning and management of the VESDA system.
This guide assumes that you have attended accredited VESDA training on commissioning and are
knowledgeable about the VESDA product range. This guide also assumes that you have an understanding of
the various aspects of an aspirating smoke detection system and are fully aware of the local codes and
standards.
To commission the VESDA system you must have the necessary certification issued by Xtralis or an
authorized distributor. Commissioning before you receive the appropriate training may void the warranty.
Document Conventions
The following typographic conventions are used in this document:
Convention Description
Bold Used to denote: emphasis. Used for names of menus, menu options,
toolbar buttons
Italics Used to denote: references to other parts of this document or other
documents. Used for the result of an action.
The following icons are used in this document:
Convention Description
Caution: This icon is used to indicate that there is a danger to
equipment. The danger could be loss of data, physical damage, or
permanent corruption of configuration details.
Warning: This icon is used to indicate that there is a danger of electric
shock. This may lead to death or permanent injury.
Warning: This icon is used to indicate that there is a danger of inhaling
dangerous substances. This may lead to death or permanent injury.