Xtreme Power 75021 User Manual

1.5HP 220V VARIABLE SPEED IN GROUND POOL PUMP
SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,
OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S
SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH
AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER).
OWNER’S MANUAL AND SAFETY INSTRUCTIONS
ITEM: 75021
FOR QUESTIONS PLEASE CALL OUR CUSTOMER SUPPORT: (909) 628 0880 MON-FRI 9AM TO 3PM PST

Xtreme Power 75021 Specifications

General

Model	75021
Category	Water Pump
Power Source	Electric
Housing Material	Thermoplastic
Maximum Head	25 feet
Cord Length	10 feet

Summary

IMPORTANT SAFETY INFORMATION

General Safety Warnings

Read all safety warnings and instructions. Failure to follow may result in electric shock, fire, or injury.

Electrical Safety Precautions

Connect to GFCI, ensure proper bonding, and use correct wiring for shock prevention.

Operational Safety Guidelines

Follow procedures for pressure, separation, fire hazards, running dry, and electrical connections.

Safety Precautions

Understand instructions, avoid modification, use correct tools, keep children away, and protect electrical components.

Suction Entrapment Hazards

Understand various entrapment risks and how to reduce them by proper installation of suction outlets.

Wiring and Grounding Requirements

Ensure correct voltage, wire size, and permanent grounding according to local and national codes.

DIGITAL CONTROL INTERFACE

Pump Operating Modes

Setting Speeds in Egg Timer Mode

Stopping and Starting the Pump

Setting Minimum Speed

Setting Speeds in Manual Mode

Setting Speeds in Schedule Mode

INSTALLATION

Pump Location and Mounting

Electrical Specifications

Details HP, KW, Voltage, Amps, and Wire Size requirements for proper electrical connection.

Electrical Wiring Safety

Emphasizes electrical safety, GFCI requirements, bonding, and proper wiring by qualified professionals.

OPERATION

Prior to Start-Up

Shaft Seal Replacement Procedure

Priming the Pump

Instructions for correctly priming the pump, ensuring all valves are open and filling the strainer housing.

Running Pump Dry Warning

Warning against running the pump dry, which can damage seals and void the warranty.

Shaft Seal Replacement Overview

TROUBLESHOOTING

Alerts and Warnings

Explanation of control panel alerts/warnings and how to acknowledge and resolve them.

Pump Failure and Reduced Capacity

Troubleshooting steps for common issues like priming failure, low water, clogged strainers, and reduced flow.

Common Error Conditions

Electrical and Mechanical Issues