XtremepowerUS 75217 - Clock and Timer Settings; Defrosting and Key Lock

8
Real-time clock setting
Press“ " + “ ”button 3S to set clock，
“ " symbol will flash during this setting,
Press
" " button, it will enter hour setting，
press
“ ” or “ ” buttons to change the value.
Press
" " button once more, it will enter minute setting.
Also press
“ ” or “ ” buttons to change the value.
After setting, press “
” button to back to default screen.
Timer setting
Once the time has been set correctly, this function allows a machine start time and a machine stop time to be
programmedduring the day
Press “
” botton 3S the time displayed and “1-NO” to blink. Change the hour using the “ ” or “ ” keys.
Press “
” botton again to change the minutes using the“ ” or “ ” keys.
Press “
” botton the time displayed and “1-OFF” to blink. Change the hour using the“ ” or “ ” keys.
Press “
” botton again to change the minutes using the “ ” or “ ” keys.
Press “
” botton again the display returns to normal.
The time setting is from 0 to 24 hours to recycle.
When the setting timer for on and off is the same,the setting timer is not available.
When the setting timer(displayed blinks), Press “ ” to deactivate TIMER.
Coercive Defrosting:
1. press “ ” bottom 5 seconds when the unit is heating mode, the unit go to
defrost state.
2. When fulfilled
defrost stop conditions, defrost is stopped.
Key lock:
Long press “ ” and “ ” button 3 seconds, To
set keylock.
Long press “ ” and “ ” button 3 seconds again to release keylock.