FUNCTION AND OPERATION
INSTRUCTIONS Operation Mode
1. Super chlorination mode：In any mode, press "S" button to enter, the super chlorination mode will
automatically return to the original chlorination mode
after running for 24 hours, and press "S" button again to exit
the super chlorination mode.
2. The original chlorination mode：In standby mode, press the "MORE/ON" button to enter the chlorination
mode. And adjust to a certain amount of chlorination by pressing "MORE" button, the indication light of
chlorination output will change accordingly. According to the setting of chlorination intensity, the chlorine
generator alternates between chlorination producing and suspension, and takes one hour as a cycle. For
example, when it is 60%, there are 36 minutes in chlorination producing status, and the rest 24 minutes are in
suspension.
3. Automatic cleaning mode：Keep pressing "MORE"/" ON " for a while in any working mode, the chlorine
generator enters the automatic cleaning mode
setting. The automatic cleaning cycle is set as every 1-6 hours,
and the default setting is "CL 3 " which means automatically cleaning every 3 hours (the number means frequent
intervals). Press "MORE" to increase the interval time, and "LESS" to decrease the interval time.
4
To Next Page
Loading...