Try to keep them as short as possible. By its
electrical parameters, a long conductor will have a
bigger influence on the sound than a short one. It
may also work as an antenna and thus receive
arious signals that may become a constant noise in
an active subwoofer.
Make sure that all connections are clean and not
oxidized. All connections should be mechanicall
stable, both power, signal and loudspeaker cables.
Signal cables should be separated from other
cables.
To get the best result the front speakers should be
placed symmetrical in front of the listener. The
distance between the front speakers should be
around 80% of the distance to the listener. In other
words, the recommended angle between the front
Please remember that good sound is a matter o
taste, so you have to experiment to obtain
favourite one. We wish you best of luck!
To Next Page
Loading...
