Need help?Do you have a question about the XTZ CLASS-AP 100 and is the answer not in the manual?
General| Output Power (8 ohms) | 100 W |
|---|---|
| Output Power (4 ohms) | 150 W |
| Signal-to-Noise Ratio | > 100 dB |
| Outputs | Binding posts |
| Weight | 1.5 kg |
| Damping Factor | >200 |
| Frequency Response | 20Hz - 20kHz (±0.5dB) |
| Inputs | XLR, RCA |
Company philosophy on sound reproduction and taste.
Company goal to provide the best value for money through cost-effective manufacturing.
Company contact information including website and email.
Details the amplifier's design, toroidal transformer, and output transistors.
Explanation of Class A and Class AB operating modes and their characteristics.
Description of the solid aluminium cabinet and its benefits for heat dissipation and stiffness.
Instructions for carefully unpacking the product and checking mains voltage.
List of accessories included with the product, such as the main power cord and user manual.
Guidance on room acoustics, reflections, and their impact on sound quality.
Advice on loudspeaker placement to avoid unwanted bass amplification, recommending distance from walls.
Considerations for furniture vibration and avoiding rooms with specific length-to-width ratios.
Recommendations for using short cables and ensuring clean, stable connections.
Guidelines for symmetrical front speaker placement and recommended angles for optimal sound.
Encouragement to experiment for desired sound, acknowledging taste subjectivity.
Ensuring correct phase connection between amplifier and loudspeakers for proper sound.
Warning about the risk of overloading drivers or the amplifier under high power load.
Information on Class A amplifiers needing a few minutes to stabilize operating temperature.
Instructions for using Bridge mode by connecting specific speaker terminals and changing a switch.
Overview of the power button and the Class A/AB mode selection button.
Identification of the right and left speaker output terminals.
Details on balanced and unbalanced input connectors for both right and left channels.
Explanation of Time Set, Always On/Auto, and Stereo/Bridge mode selection features.
Information on the AC power input and voltage selection switch (115V/230V).
Important safety precautions, including handling heat, moisture, and electrical safety.
Guidance on contacting dealers or XTZ for service and support via email.
Details on the one-year guarantee against manufacturing faults and terms of sale.
To Next Page
