EasyManua.ls Logo

Xycom 9460 - Installing Operating Systems; Installing Drivers; Ethernet Drivers

Default Icon
87 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 3 – Installation
3-17
Installing Operating Systems
The system CPU comes with MS-DOS
standard
.
The pre-installed operating systems are
provided in the following format:
Operating Systems Format
DOS and Windows 3.11 Disk
Windows 95 CD ROM or disk
Windows NT CD ROM
If you want to install a new operating system or re-install a current operating system, re-
fer to the operating system’s manual for directions.
Note
If you ever need to reinstall Windows NT operating system, you must
have an internal CD-ROM drive or an external parallel port CD-ROM
drive since Windows NT
only
ships on a CD-ROM disk.
Installing Drivers
This section describes how to install the drivers associated with the system.
Ethernet Drivers
If Windows 95 or Windows NT 4.0 is pre-installed on your system and you ordered the
Ethernet card option, Ethernet drivers are installed on your hard drive in the C:\netdrv di-
rectory.
Note
If you want to use Ethernet capabilities with Windows 95, your system
must have BIOS revision level 1.1 or higher. If the AHIP4+ board is in-
stalled, your system must have BIOS revision level 1.7 or higher.
If MS-DOS is installed on your system, the Ethernet drivers are supplied on your hard
drive in the C:\netdrv directory, but they are not installed.
To install the MS-DOS Ethernet drivers,
1.
At the C: prompt, type “cd netdrv”.
2.
Once the C:\netdrv path is specified, type “install”.
3.
Follow the on-screen instructions to complete installation.

Table of Contents

Related product manuals