Need help?Do you have a question about the Xycom 9462 and is the answer not in the manual?
Details the features and industrial form factor of the 9460/9462/9460KP/9462KP Flat-Panel Industrial PCs.
Lists the standard hardware features of the 9460/9462 and keypad versions, including CPU, memory, ports, and display.
Lists the necessary equipment and preparations before running system diagnostic tests.
Describes the NEMA 4/4X/12 and IP65 sealed front panel of the 9460/9462, including its features and protective aspects.
Illustrates the front panel of the 9460/9462 units, highlighting features like touch screen and status LEDs.
Explains the function and meaning of the Power, Disk, COM, and Input status LEDs on the front panel.
Details the IR port capabilities, compliance, and usage requirements, including BIOS settings.
Describes how to adjust the display contrast on STN flat-panel displays using front panel keys.
Details the display specifications for the 9460KP/9462KP, including screen sizes and types.
Explains the status LEDs for system operation on the 9460KP/9462KP.
Describes the relegendable function keys and their use for routines and alpha/symbol entry.
Covers the front and rear PS/2 keyboard connectors and usage notes for the 9460KP/9462KP.
Describes the DB-25 pin parallel printer port (LPT1) and its features, including external reset.
Details COM1 (RS-232/485) and COM2 (for IR, touch screen, or 25-pin connector) with usage notes.
Explains the PS/2 keyboard port and its connection options, with warnings for hazardous environments.
Describes the three-pin power connector and refers to hazardous location installation instructions.
Explains how to order and reconfigure DRAM capacity by changing SIMMs on the board.
Details mounting the external floppy drive on the back or front of the unit, with notes on cable reach.
Explains how to install Ethernet drivers for Windows 95/NT and MS-DOS, including BIOS revision notes.
Details creating an AC power cable, including connector types, wire gauge, and stripping/tinning procedures.
Details requirements and procedures for loading the PKIM utility from disk or hard drive.
Explains how to run the PKIM utility, including the /t switch for XT mode keyboards.
Describes the batch mode feature for reprogramming keypads from a batch file.
Illustrates and describes the main menu options of the Xycom PKIM Utility.
Enables recording up to 105 key strokes in a macro, with options for format and click control.
Erases the entire keypad macro set from EEPROM and initializes with default settings.
Lists general preventive measures like cleaning screens, filters, checking connections, and removing obstructions.
Details mechanical, electrical, backplane, flat panel, agency approvals, and regulatory compliance.
Details the pinout for the stacked keyboard and mouse port connector.
Details the pinout for the PS/2 mouse port connector, noting unavailability with touch screen.
Instructions for replacing bulbs in the Kyocera STN Flat-Panel Display (model #KCS6448HSTT-X21).
Instructions for replacing bulbs in the Sharp TFT Flat-Panel Display (model #LQ10D421).
Instructions for replacing bulbs in the Mitsubishi TFT Flat-Panel Display (Model #AA12SB6C-ADFD).
Instructions for replacing bulbs in the Kyocera STN Flat-Panel Display (Model #KCB8060BSTT-X4).
Instructions for replacing bulbs in the Sharp 12.1" TFT Flat-Panel Display (Model #LQ12S41).
General| Brand | Xycom |
|---|---|
| Model | 9462 |
| Category | Industrial PC |
| Language | English |
To Next Page