Need help?Do you have a question about the Xylem Flygt 2620.172 and is the answer not in the manual?
General| Brand | Xylem |
|---|---|
| Model | Flygt 2620.172 |
| Category | Water Pump |
| Language | English |
Overview of the manual's purpose and scope.
Explains hazard levels and warning symbols used in the manual.
Guidelines for safe operation and site considerations.
Safety measures for equipment used in dynamic environments.
Precautions when handling potentially hazardous liquids.
Procedures for contact with chemicals or hazardous fluids.
Guidelines for emissions and waste disposal.
Proper disposal procedures according to regulations.
Importance of using genuine manufacturer spare parts.
Reference to sales contract for warranty details.
Lists the models covered by the manual.
Describes the submersible, electric motor-driven pump.
Details on stator thermal contacts and level regulators.
Features and functionality of optional level control devices.
Explanation of the product's data plate specifications.
Explains how to read and interpret product codes.
Rules for installation in explosive or flammable zones.
Safety measures before starting electrical work.
Requirements for proper electrical grounding.
Special instructions for standard versions.
Steps for preparing SUBCAB cables for connection.
Reference for cable connection diagrams and color codes.
Procedure to verify correct pump rotation direction.
Essential safety steps before performing maintenance.
Systematic approach to diagnosing pump issues.
Specifications for tightening screws and nuts.
Steps for draining and refilling pump oil.
Key procedures for dismantling the pump for service.
Detailed steps to remove the impeller from drainage versions.
Procedure for safely removing the mechanical seal.
Steps to remove internal pump bearings.
Instructions for detaching the stator from the housing.
Key procedures for reassembling the pump after service.
Steps for correctly installing the stator into its housing.
Procedure for fitting the pump top on standard versions.
Steps for correctly installing the impeller on drainage versions.
Procedure for fitting the mechanical seal on standard versions.
Method to verify the seal's integrity after installation.
Guidelines for regular inspection and overhaul.
Steps and checks for routine pump inspection.
Guidelines for comprehensive pump overhaul.
Diagnosing and resolving electrical issues.
Troubleshooting steps for a non-starting pump.
Diagnosing issues with level sensor-controlled stopping.
Identifying causes for frequent pump cycling.
Troubleshooting reasons for motor overload trips.
Diagnosing and fixing reduced flow or no output.
Operating parameters and environmental constraints.
General motor specifications and classifications.
Detailed electrical data for various motor configurations.
Physical specifications and measurements of the pump.
List of specialized tools needed for servicing.
Resistance values for stator windings.
To Next Page
