To Next PageTo Next PageWhat to do if Xylem Measuring Instruments unit does not communicate with the pump?
If the Xylem Measuring Instruments unit isn't communicating with the pump, verify the pump is receiving voltage. If the issue persists, try restarting both the pump and the unit.
How to troubleshoot if the PWR LED is not lit on Xylem Measuring Instruments?
If the PWR LED is not lit on your Xylem Measuring Instruments, first ensure the unit is receiving voltage. If it still doesn't light up, try restarting the unit.
General| Brand | Xylem |
|---|---|
| Model | FLYGT Concertor APP 411 |
| Category | Measuring Instruments |
| Language | English |
Purpose, reading, and intended use of the manual.
Explains safety messages, hazard levels, and specific symbols.
Covers electrical safety, regulations, personnel qualifications, and power lock-out procedures.
Describes the Concertor™ wastewater pumping system and its intelligent technology.
Details the parts of the Concertor™ XPC system, including controller, gateway, and HMI.
Details the APP 411 controller's role and connection to pumps.
Lists certifications and approvals for the product.
Identifies physical components and connections of the APP 411 unit.
Explains the information found on the product's data plate, like MAC address and serial number.
Advises against installing the unit in environments with flammable or aggressive gases.
Instructions for snapping a single Concertor™ XPC unit onto a DIN rail.
Guidance on installing multiple Concertor™ XPC units, including backplane connectors.
Safety warnings and precautions for electrical connections, including grounding and qualified personnel.
Details on connecting pump, Ethernet, HMI, Modbus, analog inputs/outputs, and digital inputs/outputs.
Instructions for connecting multiple units in an XPC system, including backplanes and power cables.
Briefly mentions system operation and refers to another manual for details.
Explains the meaning of LED indicators for normal operation and fault conditions.
Safety warnings regarding crush hazards and cleaning instructions for the unit.
Step-by-step guide for changing the internal real-time clock (RTC) battery.
Provides causes and remedies for the unit not receiving voltage or not communicating with the pump.
Provides the physical dimensions of the unit.
Specifies operating temperature, humidity, altitude, and installation location.
Explains the Ingress Protection (IP) rating of the unit.
Details supply voltage, tolerance, and current consumption.
Information about the internal real-time clock battery type and capacity.
Detailed breakdown of all terminals, their sections, and descriptions.
