Need help?Do you have a question about the Xylem Rule LoPro LP900S and is the answer not in the manual?
General| Model | LoPro LP900S |
|---|---|
| Type | Submersible |
| Voltage | 12V |
| Fuse Size | 7.5 A |
| Power Source | 12V DC |
| Flow Rate | 900 GPH (Gallons Per Hour) @ 0 ft |
General rules for safe operation and handling of the pump.
Guidelines for electrical connections, wire sizing, and compliance with standards.
Illustrates typical wiring configurations for automatic pump operation.
Wiring diagram for constant automatic operation with manual override functionality.
Wiring diagram for constant automatic operation without manual override.
Details on low and high sensor settings for different bilge depths and areas.
Recommendations for securely mounting the pump and preventing water ingress.
Best practice for cleaning the sensor housing to maintain pump efficiency.
Guidance on mounting thru-hull fittings to prevent siphoning and ensure proper discharge.
Recommendation for securing hose connections with two stainless steel clamps.
Procedure for draining residual water from plumbing during winterization.
To Next Page