Need help?Do you have a question about the Xylem WTW pH 3310 and is the answer not in the manual?
General| Temperature Resolution | 0.1 °C |
|---|---|
| Calibration | automatic or manual |
| Automatic Buffer Recognition | yes |
| Protection Class | IP 67 |
| mV Resolution | 0.1 mV |
| Resolution pH | 0.01 |
| Accuracy pH | ±0.01 pH |
| Buffer Sets | DIN |
| Display | LCD |
| Data Storage | no |
Provides a general introduction to the pH 3310 meter's capabilities and benefits, emphasizing comfort, reliability, and certainty.
Details the functions of softkeys (F1, F2), parameter selection (M), calibration (CAL), value saving (STO), recall (RCL), and navigation keys.
Explains the On/Off key for device power, ENTER for menu access/confirmation, and AR for freezing values or AutoRead.
Details status information, measured value with unit, measured parameter, CMC function, sensor symbol, and temperature display.
Covers further status information and softkeys with date/time displayed on the meter's screen.
Identifies the pH electrode, reference electrode, temperature sensor, USB B interface, and service interface connections.
Outlines the initial steps for commissioning, including battery insertion and switching the meter on.
To Next Page