EasyManua.ls Logo

Xylem Sontek River Surveyor RS5 User Manual

Xylem Sontek River Surveyor RS5
149 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
RS5
USER MANUAL
USER MANUAL
XA00125

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Xylem Sontek River Surveyor RS5 and is the answer not in the manual?

Xylem Sontek River Surveyor RS5 Specifications

General IconGeneral
BrandXylem
ModelSontek River Surveyor RS5
CategoryMeasuring Instruments
LanguageEnglish

Summary

Declarations of Conformity

Manufacturer and Regulatory Information

Identifies manufacturer, product name, and country of origin.

FCC and IC Compliance

Declares conformance to FCC Part 15 and IC ICES-001 regulations.

EU Directives and Harmonized Standards

Lists applicable EU directives and harmonized standards for CE marking.

Battery and IP Rating Compliance

Covers Li-Ion battery handling standards and IP-67 ingress protection rating.

FCC Information

FCC Compliance Statement

Reiterates FCC compliance rules and operational conditions for the device.

Section 1. Introduction

Section 2. RS5 Instrument Specifications

RS5 Instrument Specifications

Detailed technical specs for hardware, software, battery, and GPS.

Section 3. RS5 Configuration Options and Setup

RS5 Models and Basic Configuration

Describes RS5 Basic vs. Max models and ADP overview.

Section 4. System Maintenance

Section 5. Pre-Measurement Hardware Setup Steps

Section 6. RSQ for PC – Moving Boat

RSQ Software Overview and Installation

Introduction to RSQ software, system requirements, and installation process.

RSQ Software Interface and Data Collection

Explains the RSQ interface, toolbar, sidebar, and data collection workflow.

Section 7. Collecting a Measurement – Moving Boat

Data Collection Process Steps

Step-by-step guide for conducting measurements, including transects and moving bed tests.

Section 8. Reviewing Data Files and Post-Processing – Moving Boat

Discharge Settings and Corrections

Adjusting calculation parameters and applying corrections like beam switching.

Appendix A. Site Selection Requirements

Appendix C. Hardware Utilities

Appendix D. How to Enable External GNSS using the GNSS Unlock Code

GNSS Unlock and Configuration

Steps to enable GNSS capabilities using an unlock code.

Related product manuals