SonTek RS5 User Manual (August 2020) 103
Figure 88. Data Review and Processing View
The data file’s name will appear on the top of the software screen, and separate tabs
can be available for all moving bed and transects (see Appendix B to enable or disable
these tabs). The QA/QC Warnings window, Toolbox, and Discharge Summary can be
viewed by either clicking the Window button or by using the hot keys outlined in Section
6.7.
8.5. Measurement Session Options
This session describes the various functions under the Measurement Session button,
highlighted in Figure 89.
Figure 89. Measurem ent Session Button
To Next Page
Loading...
