Xylem Sontek River Surveyor RS5 - Manual Device Connection for Windows 7 Users (COM Port Selection)

SonTek RS5 User Manual (August 2020) 60
Figure 31. Connect to Instrument via Serial Num ber
The same connection progress messages will appear as shown in Figure 30.
7.3.3 Manual Device Connection for Windows 7 Users (COM port
selection)
For users operating computers on Windows 7, a manual COM port option will appear in
the Connection dialog, shown in Figure 32.
Figure 32. Connection Dialog for Window s 7
The user must ensure that the COM number appearing in the Device Manager for
SonTek BLE (see Figure 33) matches the COM number indicated in the serial port
dialog highlighted in Figure 32.