Xylem Sontek River Surveyor RS5 User Manual

SonTek RS5 User Manual (August 2020) 120
8.9. Toolbox
The post-processing Toolbox allows the user to enter or modify settings from the Smart
Page conveniently. The Toolbox can be activated by either selecting it from the Window
button (main toolbar) or using [CTRL+T]. This will activate the Toolbox window shown in
Figure 110
Figure 110. Post-Processing Toolbox
Individual categories can either be selected by clicking them or using the hot keys. They
include:
 Editing Site Information [CTRL+1]
 Editing System Configuration [CTRL+2]
 Editing Edge Configuration [CTRL+3]
 Editing Extrapolation Configuration [CTRL+4]
 Editing Calculation Thresholds [CTRL+5]
All settings in the Toolbox can be changed by using the Smart Page in post-processing
as well. Changes made to these settings will be reflected in all data and calculations as
they are applied in the software. Each setting and category is described in detail in
Section 7.5.

Xylem Sontek River Surveyor RS5 Specifications

General

Brand	Xylem
Model	Sontek River Surveyor RS5
Category	Measuring Instruments
Language	English