SonTek RS5 User Manual (August 2020) 38
Section 6. RSQ for PC – Moving Boat
6.1. Overview – RSQ Software for PC
This section describes the RSQ software for RS5 data collection, viewing, and post -processing.
The software includes everything needed to make real-time discharge measurements as well as
post-process the data. Additionally, RSQ is capable of post-processing RiverSurveyor M9/S5
data files.
6.2. PC System Requirements
Microsoft Windows 7 or newer
2Ghz processor or faster
4GB memory (8GB recommended)
1GB available disk space
1024 x 768 monitor resolution or better
USB port
6.3. Software Installation
The RSQ software installation file is included in the USB drive with your system. It can also be
downloaded free of charge at:
https://www.sontek.com/software-downloads
The program should automatically start and display the installation menu. Follow the instructions
to install the software. You will be asked to accept the Terms of Agreement. When prompted to
install the driver, please proceed with the driver installation, as that will enable the USB
Bluetooth dongle to work properly with the RS5.
6.4. Starting the Software
Using the Windows start menu, select RSQ, or double click the RSQ icon (shown in Figure 14)
installed on the Windows desktop.
To Next Page
Loading...
Need help?
General
