Xyron ezLaminator - Using the ezLaminator with a 9-Inch Cartridge; Using the ezLaminator with a 5-Inch Cartridge

Using the ezLaminator
®
with a 9” Cartridge
Using the ezLaminator
®
with a 5” Cartridge
Place item on the feed tray.
Align left.
Place item on the feed tray.
Align right.
Gently guide the item forward
through the back of the machine
while turning the handle clockwise.
Cut nished product by pressing
down and sliding the cut blade
across the cut bar.