,
! . EXTERNAL CALIBRATION PORT: for quick, convenient and precise temperature
adjustments.
. DETACHABLE AC POWER CORD WITH PLUG: Engineered AC outlet for
alternating AC power cord with plug and connector specially designed for individual
CE countries requirements.
. OPTIONAL SMD TWEEZERS AND/OR FUME EXTRACTOR: The additional feature .
is specially designed for SMD chips, SOT, Flat pack ICs' etc. reworking. TWZ100
Tweezers is equipped with 32V/50W' 2 heaters which can be interchangeable with
solder wand as an option. Be sure before proceeding this operation, the main
switch must be " OFF" to avoid any damage to the unit.
Also the additional use of a tip fume extractor kits can be engineered on the solder
wand in conjunction with production line fume extraction systems.
."
PRODUCTION DESCRIPTION
.
The LF series high power electronically temperature controlled soldering station were ;;
spcially designed and developed to meet the present and future Lead-free soldering
needs of the electronic production industry. A temperature regulated soldering iron is
essential for marking consistent, reliable soldered connections. It provides all the
benefits of temperature regulation and connects via a highly flexible burn-resistant
lead, and can be easily adjusted in temperature.
The LF series incorporates electronic circuitry which enables the user to alter tip
temperature from 200 to 450'C (392-842'F) without changing tips or heating elements.
Also, with the simple flip of a switch on the front panel, the temperature readout is
changed from Celsius to Fahrenheit easily. The temperature is maintained within '""
:t 3 'c (:t 6 'c ) of its operating temperature by a thermocouple sensor placed in the
heating element, allowing the tip to rest against the sensor. The high power results in
both a rapid heat-up and super fast recovery.
The revolutionary "Zero Voltage" electronic switching design also protects voltage
and current sensitive components (CMOS devices, etc.) against damaging current and
transient voltage spikes commonly produced by less efficient, mechanically switched
stations. The power unit is isolated from the A. C. line by a transformer and allows
only 32Vac to drive the heating element. An external calibration port on the face of the
unit for quick and convenient precision temperature adjustments. The many features ,"i~
of the product make it the ideal tool for service and repair technicians as well as
production line soldering operations. This unit is developed to meet the present and
future lead-free soldering needs of the electronic production industry and is ideal for
use at any AC outlet.
-2-
r
,(
i S
I
To Next Page
Loading...
Need help?
General
