32 // YAASA ADJUSTABLE BED OWNER‘S MANUAL 33YAASA ADJUSTABLE BED OWNER‘S MANUAL //
After this action, the batteries must be replaced.
If batteries are stored in the power supply as a backup they must
be replaced annually.
Press the button on the power supply until the bed is in the flat
position:
Remote control defective
or lost.
Parts of the bed do not
move evenly.
Make sure the bed is leveled evenly. Make sure no heavy ob-
jects or any person is on the bed or in the range of moving parts.
Perform a drive reset by pressing the Flat Position button for
at least 15 seconds. The remote control displays “F” to confirm
the input. Then the bed will move into the flat position and re-
sets the drive position.
Side to side cable gets
unplugged.
Side to side cable gets
unplugged during
movement.
Plug in the side to side cable. Perform a drive reset by press-
ing the Flat Position button for at least 15 seconds. The re-
mote control displays “F” to confirm the input. Then the bed
will move into the flat position and resets the drive position.
Unplug the power converter until the LED goes out and plug it
back in.
Plug in the side to side cable. Perform a drive reset by pressing
the Flat Position button for at least 15 seconds. The remote
control displays “F” to confirm the input. Then the bed will move
into the flat position and resets the drive position.
WARNING
Using the button on the power converter to lower the bed will override the Child Lock feature.
Make sure no children or pets are near moving parts when performing this action.
WARNING
By inserting batteries into the power supply the bed can be moved even if not connected to the
mains and when the Child Lock function is activated.
To Next Page
Loading...