EasyManua.ls Logo

Yaasa Adjustable Bed - Introduction

Yaasa Adjustable Bed
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12 // YAASA ADJUSTABLE BED OWNER‘S MANUAL 13YAASA ADJUSTABLE BED OWNER‘S MANUAL //
PREFACE
Dear Customer,
Thank you for choosing a product from Yaasa.
With the Yaasa Adjustable bed you have a product that meets all safety requirements.
Wrong or unintended installation or use of the system might lead to several dangers. In chapter
1 “SAFETY” and by safety notes in the entire manual we point out various dangers which might
appear.
This manual shall enable persons to assemble and operate the system safely.
Following the notes and warnings in this document helps avoid dangers and damage of the sys-
tem. All persons working at and with the system must have the manual available when perform-
ing tasks at and with the system. Furthermore, they must follow the relevant data and notes. The
manual must always be complete and legible.
Yaasa Studios Inc. assumes no liability either for technical or printing errors nor for deficiencies
in this documentation, furthermore there is no liability for damages caused directly or indirectly
by the delivery, performance or usage of this documentation.
MANUFACTURER / SUPPORT
Yaasa Studios
511 Olive Street
Santa Barbara, CA 93101
USA
help.yaasa.com
NOTICE
In case of technical problems contact our support:
Phone Number: 855-622-3711
email: info@yaasastudios.com
Always mention product name and revision status when requesting support (see type plate).
02
LIABILITY
The descriptions of product characteristics in this operating manual do not constitute a gua-
rantee of the presence of these characteristics.
No liability shall be assumed for defects or damage caused by any of the following reasons:
Unintended use of the system.
Disregard of this manual.
Unauthorized modifications of the system.
Improper work on and with the system.
Operating the system when it is damaged.
Improperly executed repairs.
Unauthorized modification of operating parameters.
Catastrophes, external influences or force majeure.
Introduction