30 // YAASA ADJUSTABLE BED OWNER‘S MANUAL 31YAASA ADJUSTABLE BED OWNER‘S MANUAL //
CLEANING
WARNING
To reduce the risk of electric shock: Always unplug this bed from the electrical outlet before
cleaning.
To clean any parts of Yaasa Adjustable Bed only use a dry or damp lint free cloth. Do not get any
parts wet during cleaning.
NOTICE
Do not use any cleaning agent to clean Yaasa Adjustable Bed as it may damage the surface fin-
ish. Non-alcohol based cleaners, sanitizers or others can destroy the anodized layer.
MAINTENANCE
The Yaasa Adjustable Bed is maintenance-free. In case of any damage or problem please con-
tact Yaasa:
07
Insert two 9V battery blocks into the power converter. Do not
use rechargeable batteries.
Make sure no heavy object or any person is on the bed or in the
range of moving parts.
Press the button on the power supply until the bed is in the flat
position.
08
BEHAVIOR
Remote does light up but
bed does not respond to
button presses.
Remote does not light up
during button presses and
bed does not respond.
Parts of the bed remain in
elevated position during
power failure.
POSSIBLE CAUSE / SOLUTION
1. Check power connection of the bed.
2.
Possible overheating after continuous use.
(The bed is not designed for continuous operation. Wait one
minute after each complete driving cycle.)
3. Unplug the power converter until the LED goes out and plug
it back in.
Replace the batteries of the remote control.
Unplug the power converter from the power connection.
Remove the cover of the power converter:
Phone: 855-622-3711
E-Mail: info@yaasastudios.com
Cleaning &
Maintenance
Unusual Behavior
& Solutions
To Next Page
Loading...