EN 11
Setting Up The Projector
The projector's home page is as follow.
Select the desired insert signal source (HDMI/AV) on the home-page.
Use the digital 4D keystone correction of the projector to change the image to be rectangle
(vertical and horizontal). Detail please refer the page 16 of this manual.
1. Select The Insert Signal Source
2. Digital 4D Keystone Correction
2.1 Play Video/Audio/Image/Office in the USB Disk Input Mode
2. USB Disk Input Mode
1. Insert the USB Disk, Select the icon [USB] on the Settings Page.
2. Selec the option [All/Video/Audio/Image].
3. Select the desired file (or folder to enter the subfolder) in the USB disk, then press the [ OK ]
button to play it.
To Next Page
Loading...
Need help?
General
