Yaber V2 User Manual

Press the OK button to enter the WIFI list - Select your home WIFI from the
list - Connect the V2 projector to your home WIFI
Method 1: Home Network Connection Mode
Step 1
Press the [OK] button on the remote
control and connect with WIFI.
Connect with IOS phone via screen mirroring
1.Click WIFI and find [RKcast-xxxxxxxx] from your
phone.Then enter password[12345678] on your phone.
2.Click Airplay/Screen mirroring on your phone and connect
[RKcast-xxxxxxxx].
Connect with Android Phone：
1.Connect WIFI on your phone.
2.Click Airplay on your phone
Connect by Cables:
1.Connect phone with USB port by phone USB cables.
2.Click "trust"when connect with phone.
Connect with IOS phone via WIFI
1.Press OK to enter the WIFI selection interface from the
projector.Choose your home WIFI and enter the password
by remote control.
2.Connect same WIFI from your phone.
3.Click Airplay/Screen mirroring on your phone and connect
[RKcast-xxxxxxxx].
PIN IP DEVICE
OR
Plug&Play
EN
Connected
WIFI
Search
ChinaNet-Rr
ChinaNet-TT
ChinaNet-clo
ChinaNet-kk
ChinaNet-aaa
ChinaNet-bbb
12
Wireless Projection Method
1. For iOS Users

Yaber V2 Specifications

General

Lamp Life	100, 000 Hours
Connectivity	HDMI, USB, VGA, AV, Audio Out
Aspect Ratio	4:3/16:9
Resolution	1280x720P (Native)
Maximum Supported Resolution	1920x1080P