Yada AC532791 - Charging the Jump Starter; Charging at Home; Charging in Car; Other Charging Methods

8
NOTE: Fully charge the Jump Starter upon receipt. Check battery status periodically and recharge every
2-3 months and after every use to maintain the efciency and to prolong the life of the internal battery.
CHARGING THE JUMP STARTER:
At home:
Micro USB Cable
1. Plug included Micro USB Charging Cable
into a USB-A port on a 2A USB wall adapter
(not included).
2. Connect the Micro USB Charging Cable
into the Micro USB Charge Input Port on the
Jump Starter.
3. Disconnect the Jump Starter when it is fully
charged. Store the Jump Starter in a safe
place when not in use.
In Car:
1. Plug Micro USB Charging Cable into 12V
USB Charger (not included) then connect it
to 12V socket in vehicle.
2. Connect the Micro USB Charging Cable
into the Micro USB Charge Input Port on the
Jump Starter.
3. Disconnect the Jump Starter when it is fully
charged. Store the Jump Starter in a safe
place when not in use.
Other Charging Method
USB-A to USB-C Cable / USB-C to USB-C Cable
(cables not included)
1. Plug one end of USB-C Charging Cable into
a USB-A or USB-C port on a 18W (or above)
wall adapter (not included).
2. Connect the other end of USB-C Charging
Cable into the USB-C Charging Input Port on
the Jump Starter.
3. Disconnect the Jump Starter when it is fully
charged. Store the Jump Starter in a safe
place when not in use.