9
JUMP STARTING:
1. Press the power button on the
Jump Starter
once and check that the
power level indicator has 3 (51%) or more solid lights.
2. Take
the GRAY end of the jumper cable and plug it into the jump start
socket which is located underneath the black cover.
JUMP STARTING:
BEFORE YOU JUMP START!
Before you attempt to jump start your vehicle, ensure your vehicle is
in Park. Unplug all USB charging cables. Ensure manual transmission
vehicles are in Neutral with the Emergency Brake engaged.
The Cable Clamps are color-coded, RED for
POSITIVE (+) and BLACK for NEGATIVE
(-). DO NOT mix up the cables or allow the
metal ends to touch together because this
may damage the battery, charging system
and/or electronics on a vehicle.
Locate the vehicle battery and follow the
steps below.
Red
Black
To Next Page
Loading...