PART 4 Dashboard
UL
30km/h
15km/h
6km/h
EN17128
25km/h
15km/h
6km/h
KS6 Pro
Mode
S
D
① Speedometer
② Fault warning
③ Bluetooth
④ Headlight
⑤ Mode
⑥ Battery Level
⑦ Multifunction button
1. Speedometer: Display the scooter speed and fault codes in real time.
2. Fault warning: The indicator is steady on, indicating that there is a fault.
3. Bluetooth connection: Bluetooth indicator lights up to indicate that the scooter is connected to
Bluetooth.
4. Headlight: Light up if the headlight is turned on and light off if turned off.
5. Gear switching mode: Three modes. “ ” is pedestrian mode (low speed), “D” is standard mode
(medium speed), and "S" is sport mode (high speed).
6. Battery level indicator: The battery Level is indicated by 5 bars, each representing approximately
20%.
7. Multifunction button: long press to turn on/off; when the speed is 0, it will turn off automatically
after no operation for 3 min.
In the startup state, press the button once to switch the gear, and the buzzer will sound to
indicate successful operation;
In the startup state, press the button twice to turn on/off the headlight, and the buzzer will sound
to indicate successful operation;
In the startup state, press the button for 3 consecutive times to switch between km/h and mph,
and the buzzer will sound to indicate successful operation.
When the scooter is on, press the button for seven times to turn on/off the cruise control (enter
after the speed is maintained for 8 seconds, and the brake/throttle/error code will exit the cruise
mode ), and the scooter will beep after successful operation. (According to regulatory
requirements, only the UL version is suitable for this function, and the actual product shall prevail.)
07
08
To Next Page
Loading...
