1. For the first time, please practice according to the anual. Do not ride the scooter until you have
fully mastered the riding skills.
2. There is a risk of falling or injury during the ride, so please wear a helmet and safety Mode at all
times. The Mode shall be of good quality and worn in the correct position.
3. For your first ride, please select an open area and a flat road and do not drive into areas with
complex road conditions.
1. Brake Whether the brake is loose / too tight.
2. Thumb throttle Whether it can bounce back normally.
3. Handlebar Whether it rotates flexibly and whether it is loose or stuck.
4. Folding wrench Check whether the screws in the folding part are loose and shaking.
5. Instrument panel Whether all indicators light up / off normally.
6. Battery life Turn on the power switch and check whether the battery is normal in SOC.
7. Front and rear lights Whether they are in good condition and work normally.
8. Reflector Whether it is damaged or contaminated.
PART 8 Tips for Initial Use
PART 9 Pre-Riding Inspection
• Please conduct a basic inspection on the scooter before each ride. If there are obvious
abnormalities or abnormal alarm sound, do not use the scooter. For any questions, please
contact an authorized service station or after-sales E-mail: afterservice03@yadea.com to
obtain professional guidance or maintenance services.
Attention
13
14
To Next Page
Loading...
