7.Battery Charging
1.Open the seal of the charging port before charging.
2.Close the seal of the charging port after charging.
Warning:
Genuine YADEA charger must be used to charge the battery. Modification&disassem-
bling are forbidden.
Charging Port
Tips:
1.Connect the charger to battery first, then connect to the power jack.
2.Charge the battery to 100% once a month during storage.
3.Charging temperature 0-30℃
4.Discharging temperature -20-50℃
5.Storage temperature -20-45℃
Charging Port
Charging on the bike
1.Open the seal,connect the charger to the battery.
Caution:
1.Red light on the charger means charging.
2.Green light on the charger means battery charged 100% or the charger is not connected to the battery.
2.Connect the charger to power jack.
15 16
To Next Page
Loading...
