Need help?Do you have a question about the Yaesu FT-25R and is the answer not in the manual?
General| Brand | Yaesu |
|---|---|
| Model | FT-25R |
| Category | Transceiver |
| Language | English |
Highlights the key features of the FT-25R/E transceiver, including battery life, RF power, audio, construction, and emergency capabilities.
Explains the symbols and conventions used in the manual for clarity and user guidance.
Provides instructions and a link to download the FT-25R/E Advance Manual for more detailed information.
Lists the accessories included with the FT-25R/E transceiver.
Lists optional accessories that can be purchased for the FT-25R/E transceiver.
Details the splash, water, and dust resistance of the FT-25R/E and precautions for maintaining these features.
Details the connection point for the antenna and its specifications.
Describes the functions of the emergency key, including LED flash-light and alarm beeps.
Details the operation of the PWR/VOL knob for power and volume control.
Describes the LCD display and its role in showing operating conditions.
Describes the function of the 18 keys on the keypad for operating the transceiver.
Explains the operation of the PTT switch for transmitting and saving settings.
Explains how to use the F key to enter the Set Mode.
Details the function of the MONI/T.CALL key for monitoring and tone calling.
Illustrates and explains the normal display modes of the LCD.
Details the various icons and indicators displayed on the LCD screen.
Provides instructions for installing the supplied and external antennas.
Step-by-step guide on how to install the battery pack into the transceiver.
Instructions on how to safely remove the battery pack from the transceiver.
Describes how the transceiver indicates a low battery condition.
Provides estimated operating times for different battery types and bands.
Instructions on how to power the transceiver on and off.
Guide to adjusting the audio volume and setting the squelch level.
Details three methods for navigating and tuning frequencies: tuning, direct entry, and scanning.
Explains how to transmit, including using the PTT switch and microphone.
Step-by-step procedure for entering and navigating the Set Mode for configuration.
Explains the functionality of the P1-P4 keys for storing and recalling settings.
Instructions on how to lock and unlock the keypad to prevent accidental changes.
Guide to adjusting the backlight timer for the LCD and keypad.
Instructions on how to disable the audible beep for keypad presses and scan stops.
Details the Automatic Repeater Shift feature and its ON/OFF settings.
Instructions for manually setting the repeater shift mode and magnitude.
Explains Tone Calling and how to configure the MONI/T.CALL key for it.
Step-by-step guide on how to store frequencies and settings into memory channels.
Instructions on how to recall stored memory channels.
Explains how to recall the default and custom HOME channels.
Instructions on how to delete memory channels, with a caution about data loss.
Details how to access and scan NOAA weather broadcast channels.
Explains the three options for how scanning resumes after halting on a signal.
Details two VFO scanning functions: Manual and Programmed Mode scanning.
Troubleshooting steps for when the transceiver fails to power on.
Troubleshooting steps for issues related to audio output or lack thereof.
Troubleshooting steps for when the transceiver cannot transmit signals.
Troubleshooting steps for unresponsive keys or the control dial.
Troubleshooting steps for battery charging failures or rapid power depletion.
Provides general specifications for the FT-25R/E, including frequency ranges, channel steps, and physical dimensions.
Lists the technical specifications for the transmitter section of the transceiver.
Lists the technical specifications for the receiver section of the transceiver.
Details the preset operating parameters for AUTO mode for USA and Asian/European versions.
To Next Page
