To Next PageTo Next Page
Need help?Do you have a question about the Yaesu FT-2000 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Antenna Impedance | 50 ohms |
| Supply Voltage | 13.8 V DC ±15% |
| Modes | SSB, CW, AM, FM |
| Receiver Type | Triple-conversion superheterodyne |
| Weight | 15 kg |
Importance and methods for establishing an effective ground system for safety and performance.
Detailed descriptions and functions of all front panel controls and switches.
Overview of the rear panel connectors, jacks, and their functions.
Simultaneous reception on two frequencies using Main and Sub receivers.
Advanced methods for entering and navigating frequencies, including keyboard and knob use.
Explanation of the IF Roofing Filters for improved selectivity and interference rejection.
Detailed guide on operating the Variable RF Front-End Filter for signal enhancement.
Using the Roofing Filters to protect circuitry and improve reception on crowded bands.
Using the Contour filter to adjust passband components for better audio clarity.
Explanation of the AGC system for maintaining constant audio output level and preventing overload.
Controlling low, mid, and treble ranges of voice waveform for improved signal quality.
Increasing talk power and improving intelligibility using the speech processor.
Operating in Class-A mode for ultra-low distortion transmitter products during SSB.
Enabling hands-free, automatic transmitter activation based on voice input.
Operating the FT-2000D using its integrated electronic keyer and paddle.
How to navigate and adjust transceiver settings within the extensive Menu system.
Menu items for configuring CW operation, including keyer settings and break-in.
Menu items for configuring DSP filters like Notch, CW shape, and narrow bandwidth.
Menu items for adjusting the parametric microphone equalizer and speech processor.
