Yaesu FT-2000D - MENU MODE LIST User Manual

Page 112 FT-2000D OPERATING MANUAL
MENU MODE
The Menu system of the FT-2000D provides extensive customization capability, so you can set up your transceiver just the
way you want to operate it. The Menu items are grouped by general utilization category, and are numbered from “
001 AGc001 AGc
001 AGc001 AGc
001 AGc
FST DLYFST DLY
FST DLYFST DLY
FST DLY” to “
149 tGEn EMRGNCY149 tGEn EMRGNCY
149 tGEn EMRGNCY149 tGEn EMRGNCY
149 tGEn EMRGNCY.”
USING THE MENU
1. Press the
[
MENU
]
button momentarily, to engage the
Menu mode.
The Main (VFO-A) frequency display will show the
Menu Number and Menu Group name, while the Sub
(VFO-B) frequency display will show the Menu item;
the Multi-Display window shows the current setting of
the currently-selected Menu item.
2. Rotate the Main Tuning Dial knob to select the Menu
item you wish to work on.
3. Rotate the
[
SUB VFO-B
]
knob to change the current
setting of the selected Menu item.
ADVICE:
Press the
[
CLEAR
]
button momentarily to reset the
selected Menu item to the factory default value.
4. When you have finished making your adjustments,
press and hold in the
[
MENU
]
button for two seconds
to save the new setting and exit to normal operation. If
you only momentarily press the
[
MENU
]
button, the
new settings will not be retained.
Menu Mode Reset
You may reset all the Menu settings to their original factory defaults, if desired.
1. Turn the front panel
[
POWER
]
switch off.
2. Press and hold in the
[
MENU
]
button, and while holding it in, press the
[
POWER
]
switch to turn the transceiver
back on. Now release the
[
MENU
]
button.
Menu Number Menu Group Name Menu Item
Menu Setting
Main Tuning Dial Knob
[
SUB VFO-B
]
Knob
[
MENU
]
Button
[
CLEAR
]
Button

Yaesu FT-2000D - MENU MODE LIST Specifications

General

Power Supply	13.8 V DC
Mode	SSB, CW, AM, FM
Receiver Type	Superheterodyne
Selectivity	500 Hz
Antenna Impedance	50 ohms
Sensitivity	0.2 uV (SSB/CW)

Summary

USING THE MENU

Menu Mode Reset

Menu Item Categories

AGC Group Menu Items

Lists and describes settings related to Automatic Gain Control (AGC).

Display Group Menu Items

Details settings for the transceiver's display and indicators.

DVS Group Menu Items

Covers settings for the Digital Voice System (DVS) features.

Keyer Group Menu Items

Provides settings for the electronic keyer functions.

General Group Menu Items

Contains general operating and configuration settings.

S IF SFT Group Menu Items

Defines Sub Band IF Shift settings for various modes.

Mode-AM Group Menu Items

Lists settings specific to the AM mode operation.

Mode-CW Group Menu Items

Details CW mode specific settings and keyer configurations.

Mode-DAT Group Menu Items

Covers settings for data modes like RTTY and Packet.

Mode-FM Group Menu Items

Lists settings specific to the FM mode operation.

Mode-RTY Group Menu Items

Provides settings for RTTY operation.

Mode-SSB Group Menu Items

Details settings specific to SSB mode operation.

RX Audio Group Menu Items

Configures audio settings for receiver operations.

RX DSP Group Menu Items

Details Digital Signal Processing (DSP) filter settings.

Scope Group Menu Items

Settings related to the Spectrum Scope function.

Tuning Group Menu Items

Adjusts tuning speed and step settings.

TX Audio Group Menu Items

Settings for the parametric microphone equalizer and speech processor.

TX GNRL Group Menu Items

Covers general TX settings, amplifier operation, and VOX.