Page 127FT-2000D OPERATING MANUAL
110 SCP 14.0 FI
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 20 m amateur
band.
Available Values: (1)4.000 - (1)4.349 MHz (1 kHz/step)
Default Setting: (1)4.000 MHz
111 SCP 18.0 FI
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 17 m amateur
band.
Available Values: (1)8.000 - (1)8.199 MHz (1 kHz/step)
Default Setting: (1)8.068 MHz
112 SCP 21.0 FI
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 15 m amateur
band.
Available Values: (2)1.000 - (2)1.449 MHz (1 kHz/step)
Default Setting: (2)1.000 MHz
113 SCP 24.8 FI
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 12 m amateur
band.
Available Values: (2)4.800 - (2)4.989 MHz (1 kHz/step)
Default Setting: (2)4.890 MHz
114 SCP 28.0 FI
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 10 m amateur
band.
Available Values: (2)8.000 - (2)9.699 MHz (1 kHz/step)
Default Setting: (2)8.000 MHz
115 SCP 50.0 FI
Function: Selects the scan start frequency of the FIX mode
Spectrum Scope while monitoring on the 6 m amateur band.
Available Values: (5)0.000 - (5)3.999 MHz (1 kHz/step)
Default Setting: (5)0.000 MHz
MENU MODE
TUNING GROUP
116 tun DIALSTEP
Function: Setting of the Main Tuning Dial knob’s tuning
speed on the SSB, CW, and AM modes.
Available Values: 1 or 10 Hz
Default Setting: 10 Hz
117 tun CW FINE
Function: Enabling/disabling of the “Fine” tuning speed
in the CW mode.
Available Values: EnA (ENABLE) / diS (DISABLE)
Default Setting: diS (DISABLE)
EnA (ENABLE): Tuning in 1 Hz steps on the CW
mode.
diS (DISABLE): Tuning according to the steps deter-
mined via menu item “116 tun
DIALSTEP.”
118 tun MHz SEL
Function: Selects the tuning steps for the
[
SUB VFO-B
]
knob when the
[
MHz
]
button is pressed.
Available Values: 1/0.1 MHz
Default Setting: 1 MHz
119 tun AM STEP
Function: Selects the tuning steps for the microphone’s
[
UP
]
/
[
DWN
]
keys in the AM mode.
Available Values: 2.5/5/9/10/12.5 kHz
Default Setting: 5 kHz
120 tun FM STEP
Function: Selects the tuning steps for the microphone’s
[
UP
]
/
[
DWN
]
keys in the FM mode.
Available Values: 5/6.25/10/12.5/25 kHz
Default Setting: 5 kHz
121 tun FM DIAL
Function: Setting of the Main Tuning Dial knob’s tuning
speed in the FM mode.
Available Values: 10/100 Hz per step
Default Setting: 100 Hz per step
122 tun MY BAND
Function: Programs a band to be skipped while selecting
bands using the
[
SUB VFO-B
]
knob.
Available Values: 1.8 ~ 50/GE/AU
Default Setting: ---
To program the band to be skipped, rotate the
[
SUB VFO-
B
]
knob to recall the band to be skipped while selecting
bands via the
[
SUB VFO-B
]
knob, then press the
[
ENT
]
button to change this setting to “ON” (a “d” notation will
replace the “E” notation). Repeat the same procedures to
cancel the setting (skipped “Off”: “d” notation appears).
SCOPE GROUP
To Next Page
Loading...
