Yaesu FT-2000 Errata

FT-2000 OPERATING MANUAL ERRATA
The “Quick Point” on the page 83 is incorrect.
The
[
DELAY
]
knob is used for both VOX and CW operations.
Therefore, set the
[
DELAY
]
knob to adjust the hang time individually
for VOX or CW operation each time the mode is changed.
We apologize for this inconvenience.
Thank you for your understanding.
FT-2000 OPERATING MANUAL ERRATA
The “Quick Point” on the page 83 is incorrect.
The
[
DELAY
]
knob is used for both VOX and CW operations.
Therefore, set the
[
DELAY
]
knob to adjust the hang time individually
for VOX or CW operation each time the mode is changed.
We apologize for this inconvenience.
Thank you for your understanding.
FT-2000 OPERATING MANUAL ERRATA
The “Quick Point” on the page 83 is incorrect.
The
[
DELAY
]
knob is used for both VOX and CW operations.
Therefore, set the
[
DELAY
]
knob to adjust the hang time individually
for VOX or CW operation each time the mode is changed.
We apologize for this inconvenience.
Thank you for your understanding.
FT-2000 OPERATING MANUAL ERRATA
The “Quick Point” on the page 83 is incorrect.
The
[
DELAY
]
knob is used for both VOX and CW operations.
Therefore, set the
[
DELAY
]
knob to adjust the hang time individually
for VOX or CW operation each time the mode is changed.
We apologize for this inconvenience.
Thank you for your understanding.

Yaesu FT-2000 Specifications

General

Display	LCD
Antenna Impedance	50 ohms
Supply Voltage	13.8 V DC ±15%
Modes	SSB, CW, AM, FM
Receiver Type	Triple-conversion superheterodyne
Weight	15 kg