To Next PageTo Next Page
Need help?Do you have a question about the Yaesu G-5500DC and is the answer not in the manual?
General| Brand | Yaesu |
|---|---|
| Model | G-5500DC |
| Category | Controller |
| Language | English |
Details technical specifications including voltage, rotation time, torque, load, accuracy, and dimensions.
Lists all items included in the rotator package for verification against the supplied list.
Confirms AC voltage and notes cable requirements before proceeding with installation.
Step-by-step guide for preparing and connecting the control cables for the rotators.
Procedures for testing azimuth and elevation rotator functions using controller switches before final installation.
Adjusts azimuth and elevation indicators to match the rotator's end stops and full scale.
Provides information on motor duty cycle, simultaneous switch operation, and powering off the controller.
Details the pin functions of the external control interface for computer or external controller connection.
Discusses safe load, preferred mounting methods, and options for azimuth and elevation rotators.
Instructions for bolting the U-bracket to the azimuth rotator and then attaching the elevation rotator.
Steps for mounting the elevation rotator alone on a mast using stud bolts and pipe clamps.
Secures the boom in the rotator and ensures sufficient feedline slack for rotation.
Attaches the mast bracket to the rotator and centers the mast before tightening.
Uses compass and magnetic deviation to precisely orient the antenna to true North.
Warning against overtightening bracket bolts and specifies vertical mounting only.
