Need help?Do you have a question about the Yaesu G-450ADC and is the answer not in the manual?
General| Input Voltage | 12 V DC |
|---|---|
| K-Factor | 0.5 |
| Power Supply | 12 V DC |
| Type | Rotator Controller |
| Control Method | Digital |
| Rotation Range | 360 degrees |
| Maximum Intermittent Torque | 150 kg-cm |
| Maximum Continuous Torque | 150 kg-cm |
| Mast Size | 38-63 mm |
| Motor Voltage | 12 V |
| Compatibility | Yaesu Antenna Rotators |
| Current Consumption (tuning) | 2A (Max) |
| Operating Temperature | -10°C to +50°C |
| Dimensions (Tuner Controller) | 170 x 150 x 80 mm |
| Weight (Tuner Controller) | 1.5 kg |
Guides users through initial testing and alignment of the rotator.
Provides detailed steps for mounting the rotator and antenna onto a tower.
Addresses issues where the rotator unit fails to operate.
Covers troubleshooting steps for a non-functional controller unit.
To Next Page
