To Next PageTo Next Page
Need help?Do you have a question about the Yaesu VR-160 and is the answer not in the manual?
General| Modulation Types | AM, FM, WFM |
|---|---|
| Weather Alert | Yes |
| Antenna Impedance | 50 Ω |
| Audio Output Power | 500 mW |
| Power Supply | DC 6V (AA x 4) |
| Battery | 4 x AA |
| Circuit Type | Double-Conversion Superheterodyne |
Details the primary, secondary, and third functions of each key on the VR-160.
Explains the various elements displayed on the LCD screen of the VR-160.
Instructions on how to properly install the antenna on the VR-160.
Step-by-step guide for installing the Lithium-Ion battery pack into the VR-160.
Instructions on how to charge the VR-160's internal battery.
Procedure for turning the VR-160 radio on and off.
How to adjust the audio volume using the dial knob on the VR-160.
How to adjust the squelch level to mute background noise effectively.
How to switch between different frequency bands on the VR-160.
Methods for tuning frequencies using the dial and scanning features.
How to use Tone Squelch to prevent false activations from noise.
How to use Digital Code Squelch for enhanced privacy and noise immunity.
Step-by-step guide to storing frequencies into memory channels.
How to retrieve stored memory channels from the VR-160.
How to organize memories into banks for easier access and selection.
How to configure scanner behavior after stopping on a signal.
How to scan frequencies in VFO mode.
How to scan through memory channels.
How to set sub-band limits for scanning or VFO operation.
How to monitor a priority channel while operating on another.
How to configure Smart Search modes (Single, Continuous).
How the radio stores active frequencies during Smart Search.
How to set and activate a password for security.
How to access and use the Set Mode to configure parameters.
