Need help?Do you have a question about the Yaesu FRG-9600 and is the answer not in the manual?
Corrects information provided in the FRG-9600 Operating Manual regarding signal polarity and programming codes.
Presents a BASIC program for testing the CAT system interface for frequency and mode selection.
Describes initial signal processing and RF input stages, including attenuators and band selection.
Details the overall signal processing flow for SSB, AM, and narrow FM modes, including IF stages.
Explains S-meter, squelch, and mode/scan control logic and their computer interfacing.
Lists necessary test equipment and critical setup steps before performing alignment.
Covers adjustments for oscillators, RF path, and system gain for optimal performance.
Shows component placement diagrams for various functional units of the FRG-9600.
Provides details on the identification and types of integrated circuits, transistors, and diodes used.
Comprehensive list of all components, including part numbers and descriptions, used in the FRG-9600.
To Next Page
General
