Yaesu FRG-7000 User Manual

Activates attenuator for front end to minimize overloading.

Selects preselector range for peaking receiver circuits.

Fuse types and replacement instructions for different voltages.

Warning about permanent damage from improper AC supply voltage.

Caution to use fuses of the proper rating to avoid damage.

Requirements for antenna connection and earth ground.

How to read and set the operating frequency using digital display and controls.

Tuning the preselector for maximum receiver sensitivity.

Procedure to align the local oscillator for correct frequency.

Procedure to adjust output level for maximum VTVM reading.

Procedure to adjust harmonic generator for 1 MHz output.

Procedure to align oscillator unit across frequency range.

Aligning VFO frequency after warm-up for tracking.

Aligning the second IF stage for AM and kHz signals.

Aligning the third IF stage for kHz signals.

Adjusting VR401 for full scale S-meter reading.