Yakima BaseLine User Manual

1035619E-1/26
measuring tape (1X)
ruban à mesurer (x 1)
cinta de medir (1X)
BaseLine (4X)
sticker (2X)
autocollant (x 2)
etiqueta (2X)
torque wrench (1X)
clé dynamométrique (x 1)
llave de torsión (1X)
BaseLine
TO COMPLETE THE SYSTEM YOU WILL NEED:
POUR COMPLÉTER VOTRE SYSTÈME, VOUS AUREZ BESOIN DE:
PARA COMPLETAR SU SISTEMA NECESITA LO SIGUIENTE:
$0/5&/54t$0/5&/6t$0/5&/*%0
NO POWER TOOLS!
¡NINGUNA HERRAMIENTA
ELÉCTRICA!
PAS BESOIN D’OUTIL
ÉLECTRIQUE!

Yakima BaseLine Specifications

General

Brand	Yakima
Model	BaseLine
Weight Capacity	165 lbs
Compatibility	Vehicles with naked roofs
Material	Steel
Installation	Tool-free installation
Warranty	Limited Lifetime

Summary

JETSTREAM SETUP

Set Front Crossbar Toe Angle (T1)

Adjust the horizontal toe angle for the front crossbar.

Set Rear Crossbar Toe Angle (T2)

Adjust the horizontal toe angle for the rear crossbar.

COREBAR SETUP

ROUNDBAR SETUP

Set Front Crossbar Measurements (M1, P1)

Measure and set the M1 and P1 values for the front crossbar.

Set Rear Crossbar Measurements (M3, P2)

Measure and set the M3 and P2 values for the rear crossbar.

Set Front Crossbar Toe Position (T1)

Adjust the horizontal toe angle for the front crossbar.

Set Rear Crossbar Toe Position (T2)

Adjust the horizontal toe angle for the rear crossbar.

VEHICLE INSTALLATION

Place and Measure Front Crossbar

Secure Front Crossbar

Tighten the Swing bolts to secure the front crossbar.

Place and Measure Rear Crossbar

Secure Rear Crossbar

Tighten the Swing bolts to secure the rear crossbar.

Final Tightening and Locking