Yakima HoldUp - Attaching Wheel Trays to Base

1034426J-3/21
ATTACH FIRST TRAY TO BASE.
LOWER TRAY:
IMPORTANT: Wheel strap
is to your right, and pivot
arm is to your left.
wheel strap
pivot arm
ATTACH SECOND TRAY TO BASE.
pivot arm
wheel strap
 Align holes in tray to be centered in slots on base.
 Insert bolt, washer, and lock-washer, in order shown.
 Finger tighten all four bolts.
 Tighten with supplied wrench.
 Align holes in tray to be centered in slots on base.
 Install bolt, lock-washer, and washer, in order shown.
 Finger tighten all four bolts.
 Tighten with supplied wrench.
UPPER TRAY:
IMPORTANT: Wheel
strap is to your left, and
pivot arm is to your right.
17 ft-lbs.
17 ft-lbs.